涓枃

English


CATEGORY




Contact Us  
TEL:+86 755 23225716
FAX:+86 755 23209516
EMAIL:info@hkyouzi.com
Skype:hkyouzi
ADD:A308,HuaChuangDa,LongQuan 1 Road,BaoAn 38 District锛孲henZhen,GuangDong,China



HuaWei_SSN1SLD16_2-port STM-16 2.5G optical interface board

Huawei OSN3500 7500 2-port STM-16 2.5G optical interface board SSN1SLD1602 equipped with 2 S-16.1 15km SFP module

Overview

2脳STM-16 Optical Interface Board(S-16.1,LC)

Apply to Huawei OSN 3500, OSN 7500 equipment to transmit and receive 2脳STM-16 optical signals, at transit 2~15km.

Supports the detection and query of the information about the optical module.

Support the ALS function. The optical interface supports the setting of the on/off state of a laser.

Supports the usage and detection of the SFP optical module.

Supports the VC-12, VC-3, VC-4 services and VC-4-4c, VC-4-8c, VC-4-16c concatenation services.

Supports the transparent transmission and termination of the path overheads.

Supports the setting and query of the J0, J1, J2, and C2 bytes.

Supports one or two channels of ECC communication.

Supports the time synchronization feature and transmission of the time information by using the section overhead bytes.

Supports the Two-fiber ring MSP, Four-fiber ring MSP, Linear MSP, SNCP, SNCMP, SNCTP.

Supports the fiber-shared virtual trail protection.

Supports the fiber-shared MSP and processes four sets of K bytes

Supports a maximum of four MSP rings.

Supports inloops and outloops at optical interfaces.

Supports inloops and outloops on VC-4 paths.

Supports warm resets and cold resets. The warm reset does not affect services.

Supports the query of the manufacturing information of the board.

Supports the in-service loading of the FPGA.

Supports the upgrade of the board software without affecting services.

Supports the press-to-collect function in fault data collection.

 

SSN1SLD16 is a 2-ports STM-16 optical interface board, can be used on Huawei OSN3500, OSN7500. SSN1SLD16(S-16.1,LC) part number is 03030FVH, model name is SSN1SLD1602.SSN1SLD16(S-16.1,LC) comes with 2 unit S-16.1 SFP module, transmission distance is 15km. SFP module is swappable to perform different transmission distance.


Tech Specs
Front Panel

The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN1SLD16(S-16.1,LC) indicates the type of optical interface.

Valid slot
OSN 3500: When the cross-connect boards are IXCS and SXCA: the SSN1SLD16(S-16.1,LC) can be installed in slots 7,8,11,12.
Feature Code
The feature code of the SSN1SLD16(S-16.1,LC) indicates the type of optical interface.
BoardFeature CodeType of Optical Interface
SSN1SLD160202S-16.1
Optical interface parameters
ParameterValue
Nominal bit rate2488320 kbit/s
Line code patternNRZ
Application codeS-16.1
Transmission distance (km)2 to 15
Type of fiberSingle-mode LC
Operating wavelength range (nm)1260 to 1360
Launched optical power range (dBm)-5 to 0
Receiver sensitivity (dBm)-18
Minimum overload (dBm)0
Maximum -20 dB spectral width (nm)1
Minimum extinction ratio (dB)8.2
Minimum side mode suppression ratio (dB)30
Mechanical Specifications
Dimensions (mm)25.4 (W) x 235.2 (D) x 261.4 (H)
Weight (kg)0.9

 

Product Features

 

Back


Our Partners
              

Copyright ©2005-2023  Youzi Electronic CO., Limited   All rights reserved     
Tel:86 755 23225716   Email:info@hkyouzi.com

ICP:05000116